Datacolor 200 User Guide 3
Calibration Tiles
A black trap, white tile and green tile are provided with Datacolor 200.
The black trap and white tile are used each time the instrument is
calibrated.
The green tile is used during calibration to perform a diagnostic test.
The calibration accessories are located in a drawer at the
base of the instrument, and should be kept there when not in
use.
Aperture Plates
Datacolor® 200 is a single aperture instrument. However, a variety of aperture sizes are available to
accommodate different applications. Consult with a Datacolor representative to determine the correct
aperture size for your application.
NOTE
Appendix, Instrument Specifications provides details about the aperture sizes available for Datacolor
200.
About This User’s Guide
This guide is provided in a PDF format for easy access. To return to the page previously viewed when
using the hyperlinks, press the following key combination:
<ALT> <left arrow key>
To Next Page
Loading...
