DM4380 – Installation Guide
204.4336.00 - October/2019
Figure 7 – 40/100GE Ports
3.8.1.3 40 and 100 Gigabit Optical Ethernet Interface LED indicators
The 40GE/100GE ports have LEDs that indicate the operation of the ports on the left
front part of the equipment, as shown in figure 8. The convention to indicate the
operation and the 40GE and 100GE interface operating mode is described in Table 6.
Figure 8 – 40/100GE port LEDs
Link Up (active port) operating in 100GBase-X
mode.
Link Up (active port) operating at a rate lower
than 100GE.
Data sending and/or receiving activity