Datakom DKG-109 User Manual

DKG-109 User Manual V-27 (23.08.2013)
- 9 -
Screen
Description
Contents
1
Mains parameters
(phase to neutral)
Genset status
Mains Volts L1, Mains Frequency
Mains Volts L2 , Battery Voltage
Mains Volts L3, Coolant Temperature
2
Mains parameters
(phase to phase)
Genset status
Mains Volts L1-L2, Mains Frequency
Mains Volts L2-L3, Battery Voltage
Mains Volts L3-L1, Coolant Temperature
3
Genset parameters
Genset status
Engine rpm, Genset Frequency
Genset Current L1, Genset Volts L1
Genset power factor, Genset Active Power (KW)
4
Engine parameters
Genset status
Oil Pressure, Engine rpm
Coolant Temperature, Battery Voltage
Fuel Level,
5
Complete Genset
parameters
Genset status
Engine rpm, Genset Frequency,
Genset Volts L1, Oil Pressure
Genset Current L1, Coolant Temperature
Genset Active Power (KW), Fuel Level
Genset power factor, Battery Voltage
6
Graphical Genset
parameters
Genset status
Genset Volts L1
Genset Current L1
Genset Active Power (%), Genset Frequency
Oil Pressure
Coolant Temperature
Fuel Level
7
Company Logo
8
Alarm List
If no alarm exists, ‘END OF ALARM LIST’ will be displayed.
Existing alarms, load_dumps, warnings will be displayed as
one screen for each entry. Switching to the next entry will be
made with the ▼ button.
9
Software Version
Operating software version.
10
Statistical Counters 1 / 3
Engine Hours Run
Total Genset Active Power (KW-h)
11
Statistical Counters 2/ 3
Engine Hours to Service
Time to Service
12
Statistical Counters 3 / 3
Total Engine Cranks
Total Engine Runs
13
Event Records
The unit provides information about last 100 events, starting
from the most recent one.
Please review chapter 10 for detailed information about event
logging.

Datakom DKG-109 Specifications

General

Brand	Datakom
Model	DKG-109
Category	Controller
Language	English