Datakom DKG-705 - 16. MAINTENANCE

DATAKOM DKG-705 User’s Manual
705_USER.doc - 34 -
15. STATISTICAL COUNTERS
The DKG-705 provides a set of non resettable incremental counters for statistical purposes.
The counters consist on:
-total engine hours run,
-total genset active power (KW),
-total genset apparent power (KVA),
-total genset reactive power (KVAr),
-total engine cranks,
-total genset runs,
-total genset on load.
These counters are kept in a non-volatile memory and are not affected from power failures.
16. MAINTENANCE

DO NOT OPEN THE UNIT
There are NO serviceable parts inside the unit.
Wipe the unit, if necessary with a soft damp cloth. Do not use chemical agents
17. SOFTWARE DOWNLOAD
The DKG-705 application software is held in a flash memory and is field downloadable.
The software download is made using the serial port at the back panel of the unit.
Use a standard serial cable to download a new software version from the laptop computer. The cable
configuration is:
PC DKG-705
D_SUB 9 pin female……………………………….. D_SUB 9 pins male
Pin_2…………………… connected to…………… pin_2
Pin_3…………………… connected to…………… pin_3
Pin_5…………………… connected to…………… pin_5 (using the shield)
The software is downloaded using the MS-WINDOWS monitoring and configuration software. This
software may be downloaded from internet address: www.datakom.com.tr\downloads\dkg705