Select ISO Click the Select ISO button to select the ISO image you would like
to upload to the DL3™ drive.
Update Then click the Update button to upload the ISO image to the DL3™
drive. This will finalize the steps to mount an ISO image on the DL3™. If
successful, Windows will display Drive Autoplay dialog window.
Format You should only click the Format button if you wish to clear the
Virtual CD partition. This function will not destroy your DL3™ drive contents. To
mount a different ISO image file, formatting the Virtual CD is not required.
Simply select a different ISO image and then select the Update function.
Note:
• The DL3™ will only support ISO images up to 4.7GB in size.
• The new Virtual CD partition will NOT be encrypted; however, it will be
“Read Only” and accessible only after entering the correct user or
administrator password.
• For instructions on creating an ISO disk image, please consult your
operating system instructions.
To Next Page
Loading...
