Datalogic F734-E Series User Manual

F734-E SERIES TERMINALS
4
4.2 REPLACING THE BATTERIES
CAUTION
Before proceeding, ensure that the terminal is
switched off and that the data it contains has
been downloaded onto the host computer.
To replace the batteries correctly, proceed as follows.
1- Turn over the terminal and
remove the two battery
cover screws.
2- Lift the battery cover as
shown in the figure and
extract the old battery pack.
2
1
24

Datalogic F734-E Series Specifications

General

Brand	Datalogic
Model	F734-E Series
Category	Touch terminals
Language	English