GWU-HS7600 Cloud Setup
14
GWU-HS7600 GATEWAY
Figure 13. Access Point Configuration
Service Configuration
The GWU-HS7600 can be configured as a WebSocket client or a MQTT client.
To configure the proper service, configure the Service Type then open the
related sub-menu to enter the proper service configuration (). It is also possi-
ble to configure up to 3 NTP servers in section SNTP.
Figure 14. Service Configuration
Certificates
At the bottom of the configuration menu on the left, there's a section dedi-
cated to the certificate configuration for MQTT, HTTPS and WPA2 Enterprise.