7
CONNECTIVITY DEVICE
Gateway Overview
The Gateway receives the scanned barcode data from the HandScanner via BLE. This barcode data is transmitted to
the end device via USB cable. In the USB HID mode, the Gateway simulates a computer keyboard. A serial connection
is emulated in the USB CDC mode. In order to use the USB CDC mode, the device must be set to “USB CDC” in the Con-
figuration Tool https://www.datalogic.com/handscanner/config under “Connectivity Configuration - Integration path”.
Also multipairing is possible. The Gateway can be connected with up to 5 HandScanners simultaneously. See “Con-
nection with USB cable in USB CDC mode” on page 10.
Gateway
Pairing
Barcode
LED 1 (UBS LED)
LED 2 (Scanner LED)
LED 3 (Cloud LED)
Micro USB
socket
Gateway Technical Data
Mechanical properties
Dimensions
3.74 x 2.06 x 0.94 in
(95 x 52.3 x 23.8 mm)
Weight
1.5 oz
(42.5 g)
Electrical properties
Power supply of Gateway via USB
cable
5 VDC (0.5 A) via host computer
Utilities and accessories
Conguration Tool https://www.datalogic.com/handscanner/cong
Connection options
USB
USB HID (keyboard input on host)
USB CDC (virtual com port)
NOTE
Further technical specifications are available at datalogic.com/support.
To Next Page
Loading...
