Datalogic Heron HD313 Series Quick Reference Guide

Setting Up the Reader
Quick Reference Guide 5
Adjusting the Stand Position
The stand can easily be adjusted to change the inclination of the
reader while in the stand.
To adjust the stand:
1. With fingers, loosen the screw on the bottom of the stand by
turning it counterclockwise.
2. Set the stand upright and slide to adjust to the desired position.
3. Re-tighten the screw to secure the stand.
Screw

Datalogic Heron HD313 Series Specifications

General

Brand	Datalogic
Model	Heron HD313 Series
Category	Barcode Reader
Language	English