Selecting the Interface Type
6 Heron™ HD3130
Selecting the Interface Type
Upon completing the physical connection between the reader and its
host, proceed directly to Interface Selection below for information
and programming for the interface type the reader is connected to
(RS-232, Keyboard Wedge, USB) and scan the appropriate bar code to
select your system’s correct interface type, according to your applica-
tion.
For interfaces other than those listed in this manual, see the Heron
HD3130 Product Reference Guide (PRG), available online at
www.datalogic.com.
USB Interface
The reader attaches directly to a USB host, or a powered USB hub,
and is powered by it. No additional power supply is required. When
using a USB interface, the reader auto-detects the USB connection
and defaults to the USB Keyboard interface.
Select USB-COM-STD
1
(simulates RS-232 standard interface)
Select USB Keyboard (with standard key encoding)
Select USB Alternate Keyboard (with alternate key encoding)
Select USB OEM
1. Download the correct USB Com driver from www.datalogic.com.
To Next Page
Loading...
Need help?
General
