CONTENTS
USER’S MANUAL
9
CHARGE THE BATTERY
The battery pack is not initially fully charged. After installing the battery, charge it with
the USB Type-C cable included in the box or with a dock (single slot dock, 3-slot dock,
vehicle dock).
During the charging process the charging LED positioned at the top left side of the dis-
play glows red constantly. Once the charging process has been completed, the charging
LED glows green constantly.
Charge with USB
Use the USB Type-C cable included in the box in conjunction with the power supply
adapter (p/n 94ACC0196) to charge the device from a power outlet.
The charger is modular, with one adapter and five switchover plugs.
You can also use the USB cable to charge the Memor 11 from any self-powered USB hub
or USB port on a computer.
NOTE: Connection through the cable complies to USB Type-C standard.
NOTE: Use only the Datalogic power supply 94ACC0196 to power the
Memor 11.
To Next Page
Loading...
Need help?
General
