CONTENTS
28
MEMOR™ 11
LED INDICATORS
The LEDs illuminate to indicate various functions or errors on the reader. The following
tables list these indications. The good read LED indicator is programmable, and may or
may not be enabled ("
Scanner & Decoder" on page 30 for more details). The Charging LED
is configurable via SDK.
LED Status Description
Charging LED
Red Constant The device is charging.
Green Costant Charging is complete.
Red Blink Charge fault.
Red Breath Battery is low.
Green Breath Missed call/message.
Good Read Indicator
Red
Light is solid red from the time the user
presses the scan key until the barcode is
decoded, until the scanner times out, or until
the user releases the scan key.
Green
Light changes to solid green when a good
decode is completed.
Battery Swap LEDs
Red Do not remove the battery.
Green Battery can be replaced.
To Next Page
Loading...
Need help?
General
