Datalogic Memor 11 - Sd Card; Sim Card; Install the Microsd Card

14 MEMOR™ 11
SD CARD/ SIM CARD
INSTALL THE MICROSD CARD
Memor 11 supports microSD memory cards. To access the microSD card slot and insert
the card follow the steps below:
1. Turn off the Memor 11 or put it in Swap Battery mode (see "
Battery Swap" on page
19
on page).
2. Rotate the latches to the open position and remove the battery pack:
3. Insert the microSD card with the written part upward:
4. Replace the battery pack (see "
Install the Battery" on page 8, steps 2 to 3).
Remove the MicroSD Card
To remove the microSD card, follow the steps above to access the microSD slot, and
remove it from its slot.