Datalogic Memor 11 - Configure, Rename or Unpair Bluetooth Devices

CONTENTS
USER’S MANUAL 61
3. Make sure both devices show the same passkey and tap Pair.
4. The selected Bluetooth® device is added to the Previously connected devices list
and a paired connection is established.
Configure, Rename or Unpair Bluetooth® Devices
Tap Settings > Connected devices.
Select a device under Previously connected devices and tap the settings icon next to its
name. The Device Details window displays on the screen. Type the Edit icon to rename
the paired device.
Tap FORGET to unpair:
To rename your device, tap Settings > Connected Devices > Connection preferences >
Bluetooth > Device name. Type in the new name.
Tap Rename to confirm.