CONTENTS
52
MEMOR™ 11
Wi-Fi Roaming
Tap Roaming profile and select Custom to configure the roaming profile of your device.
RSSI Threshold
Sets the signal strength a radio needs to see before searching for another site.
RSSI Difference
It controls the signal difference between the current access point the device is con-
nected to and the target access point the device wants to roam to. If the target AP signal
is higher than the current by at least the value of this parameter, the device will roam.
Retry Times
Sets the number of roaming retries before aborting the roaming procedure.
Recalculation Interval
Sets the minimum time interval (in seconds) between roaming threshold calculations.
Beacon Period
Sets the interval (in seconds) between beacon listenings.
To Next Page
Loading...
