Connections
Quick Reference Guide 9
Start-Up
As with all USB devices, on connection the Host performs several checks
by communicating with the PowerScan™ PD8530. During this phase
the green LED on the PowerScan™ PD8530 blinks and normal opera-
tions are suspended. The correct USB driver must be loaded before the
PowerScan PD8530 is ready to read barcodes
For all systems, the correct USB driver for the default USB-KBD interface
is included in the Host Operating System and will either be loaded auto-
matically or will be suggested by the O.S. and should therefore be selected
from the dialog box (the first time only).
When configuring the USB-COM interface, the relevant files and drivers
must be installed from the USB Device Installation software, which can
be downloaded from the web site http://www.scanning.datalogic.com
.
The reader is ready.
To Next Page
Loading...
Need help?
General
