Services and Support
Quick Reference Guide 23
Warranty Exclusions
The Datalogic Factory Warranty shall not apply to:
(i) any product which has been damaged, modified, altered, repaired
or upgraded by other than Datalogic service personnel or its autho-
rized representatives;
(ii) any claimed defect, failure or damage which Datalogic determines
was caused by faulty operations, improper use, abuse, misuse, wear
and tear, negligence, improper storage or use of parts or accessories
not approved or supplied by Datalogic;
(iii) any claimed defect or damage caused by the use of product with
any other instrument, equipment or apparatus;
(iv) any claimed defect or damage caused by the failure to provide
proper maintenance, including but not limited to cleaning the
upper window in accordance with product manual;
(v) any defect or damage caused by natural or man-made disaster such
as but not limited to fire, water damage, floods, other natural disas-
ters, vandalism or abusive events that would cause internal and
external component damage or destruction of the whole unit, con-
sumable items;
(vi) any damage or malfunctioning caused by non-restoring action as
for example firmware or software upgrades, software or hardware
reconfigurations etc.;
(vii) the replacement of upper window/cartridge due to scratching,
stains or other degradation and/or
(viii)any consumable or equivalent (e.g., cables, power supply, batteries,
keypads, touch screen, triggers etc.).
No Assignment
Customer may not assign or otherwise transfer its rights or obligations
under this warranty except to a purchaser or transferee of product. No
attempted assignment or transfer in violation of this provision shall be
valid or binding upon Datalogic.
To Next Page
Loading...
Need help?
General
