Datalogic PowerScan PD9530 Quick Reference Guide

Regulatory Information
Quick Reference Guide 33
Power Supply
This device is intended to be connected to a UL Listed/CSA
Certified computer which supplies power directly to the read-
er or else be supplied by UL Listed/CSA Certified Power Unit
marked “Class 2” or LPS power source rated 5-14V minimum
900mA.
Imager Labeling
Aiming System
The PowerScan
™
aiming system meets the Class 2 require-
ments for laser safety. The laser information is located on the
sides of the Scanner as shown below.
Sample labels are shown here to illustrate their location only.
Please view the labels on your product for actual details, as
they may vary from those depicted.
Model P/N Power Supply
PD9530 5 VDC
PD9530-HP 5 VDC
PD9530-HPE 10-30 VDC
PD9530-DPM 5 VDC
Aiming System
Output Win
dow
Scanner Regulatory Labels

Datalogic PowerScan PD9530 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Tilt reading angle	0 - 360 °
Pitch reading angle	-40 - 40 °
Linear (1D) barcodes supported	-
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Product color	Black, Yellow
International Protection (IP) code	IP65
Input voltage	5 V
Power consumption	350 mA
Power source type	DC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Cables included	No

Weight and Dimensions

Depth	110 mm
Width	74 mm
Height	212 mm
Weight	330 g