Datalogic PowerScan PM9100 Series - HID Caps Lock State

LED and Beeper Indications
16 PowerScan™ PM9100
ROM Failure
There is an error
in the reader's
software/pro-
gramming
Flashes
Reader sounds
one error beep
at highest vol-
ume.
Limited
Scanning
Label Read
Indicates that a
host connec-
tion is not
established.
N/A
Reader 'chirps'
six times at the
highest fre-
quency and cur-
rent volume.
Reader
Disabled
The reader has
been disabled
by the host.
The LED blinks
continuously
N/A
a
Except when in sleep mode or when a Good Read LED Duration other than
00 is selected
INDICATION DESCRIPTION LED BEEPER