Datalogic PowerScan PM9501-AR Series

LED and Beeper Indications
16 PowerScan™ PM9501-AR
Table 2. Error Indicators
INDICATION DESCRIPTION LED BEEPER
Link Attempt
The reader is
trying to link to
the base
Slow Flashes N/A
Configura-
tion Align-
ment
Reader and Base
are aligning the
parameters' con-
figuration
Fast Flashes N/A
Link
The reader has
successfully
linked to the
base
N/A
3 beeps of
ascending fre-
quency
Unlink
The reader has
unlinked from
the base
N/A
3 beeps of
descending
frequency
ROM Failure
There is an error
in the reader's
software/pro-
gramming
Flashes
Reader
sounds one
error beep at
highest vol-
ume.
Limited Scan-
ning Label
Read
Indicates that a
host connection
is not estab-
lished.
N/A
Reader 'chirps'
six times at
the highest
frequency and
current vol-
ume.
Reader
Disabled
The reader has
been disabled by
the host.
The LED blinks
continuously
N/A