Datalogic PowerScan PM9501 Series User Manual

Multiple Label Reading
Quick Reference Guide 13
Multiple Label Reading
The reader offers a number of options for multiple label
reading. See the PRG or software configuration tool for
descriptions of these features and programming labels.
Technical Specifications
The following tables contain Physical and Performance
Characteristics, User Environment and Regulatory infor-
mation.
ITEM DESCRIPTION
Physical Characteristics
Dimensions
Height: 212 mm
Length: 110 mm
Width: 74 mm
Weight
PM9501-XX, PM9501-HPXX, PM9501-DPMXX: 400 g
PM9501-DXX, PM9501-DHPXX, PM9501-DDPMXX: 440 g
PM9501-DKXX, PM9501-DKHPXX: 445 g
Electrical Characteristics
Battery Type Li-Ion battery pack
Charge time for
full charge from
full discharge
4,5 hours with external power supply adapter
a
a. Charge Times are much lower when battery is within daily typical operating
condition.
Typical 10 hours with Host power (in this case
no supply adapter is needed)
a
Operating auton-
omy (continuous
reading)
60,000 reads (typical, @25°C)
Cradle consump-
tion and DC input
supply range
Volt 10-30 VDC; Power <8W
b
;
Max 500mA when in host/bus powered
mode
b
.
b. Typical input current measured under factory default configuration.

Datalogic PowerScan PM9501 Series Specifications

General

Scanner Type	Handheld
Connectivity	Wireless
Drop Resistance	Withstands repeated drops from 2.0 m / 6.6 ft onto concrete
Sealing	IP65
Operating Temperature	-20 to 50 °C / -4 to 122 °F
Type	Industrial
Storage Temperature	-40 to 70 °C / -40 to 158 °F
IP Rating	IP65
Radio Range	100 m / 328 ft
Radio Frequency	433 MHz; 910 MHz
Decode Capability	1D / 2D
Scanning Technology	Laser or Imager
Interface	RS-232, USB
Supported Barcodes	All standard 1D and 2D barcodes
Resolution	4 mil (1D Codes); 5 mil (2D Codes)
Humidity	5 to 95% (non-condensing)
Drop Specification	2.0 m / 6.6 ft onto concrete
Dimensions	8.3 x 4.3 x 2.9 in
Power Supply	Rechargeable Li-ion battery or USB power