Datalogic PowerScan PM9501 Series User Manual

LED and Beeper Indications
18 PowerScan™ PM9501
Table 3. Error Indicators
INDICATION DESCRIPTION LED BEEPER
Link Attempt
The reader is try-
ing to link to the
base
Slow Flashes N/A
Configuration
Alignment
Reader and Base
are aligning the
parameters' con-
figuration
Fast Flashes N/A
Link
The reader has
successfully
linked to the base
N/A
3 beeps of
ascending fre-
quency
Unlink
The reader has
unlinked from
the base
N/A
3 beeps of
descending
frequency
ROM Failure
There is an error
in the reader's
software/pro-
gramming
Flashes
Reader sounds
one error beep
at highest vol-
ume.
Limited Scan-
ning Label
Read
Indicates that a
host connection
is not estab-
lished.
N/A
Reader 'chirps'
six times at the
highest fre-
quency and
current vol-
ume.
Reader
Disabled
The reader has
been disabled by
the host.
The LED blinks
continuously
N/A

Datalogic PowerScan PM9501 Series Specifications

General

Scanner Type	Handheld
Connectivity	Wireless
Drop Resistance	Withstands repeated drops from 2.0 m / 6.6 ft onto concrete
Sealing	IP65
Operating Temperature	-20 to 50 °C / -4 to 122 °F
Type	Industrial
Storage Temperature	-40 to 70 °C / -40 to 158 °F
IP Rating	IP65
Radio Range	100 m / 328 ft
Radio Frequency	433 MHz; 910 MHz
Decode Capability	1D / 2D
Scanning Technology	Laser or Imager
Interface	RS-232, USB
Supported Barcodes	All standard 1D and 2D barcodes
Resolution	4 mil (1D Codes); 5 mil (2D Codes)
Humidity	5 to 95% (non-condensing)
Drop Specification	2.0 m / 6.6 ft onto concrete
Dimensions	8.3 x 4.3 x 2.9 in
Power Supply	Rechargeable Li-ion battery or USB power