Datalogic QuickScan QS2500 - Appendices and Reference; Default Settings and Bar Code Samples

Product Reference Guide 51
UK/Plessey
Read: Format:
Checksum Verification: The UK/Plessey code has one or two optional
checksum digits. The checksums are calculated as the sum mod 10 or 11
of the data digits.
Checksum Transmission: When this option is enabled, the QS2500 will
transmit the checksum.
Maximum/Minimum Code Length: Same as Code 39. See page 35.
Truncate Leading/Ending: Same as UPC-A. See page 27.
Code ID Setting: Same as UPC-A. See page 27.
Insertion Group Selection: Same as UPC-A. See page 27.
Code ID Setting
00–ff
hex
ASCII
code
00–ff
hex
<@>*
Insertion Group
Selection
0–44
00–44
00*
Option Bar Code Option
Alphanumeric
Entry
Exit
Data Digits (Variable) Checksum1+2 (Optional)