Pick Mode
26
QUICKSCAN™ 2500
PICK MODE
This option specifies the ability of the reader to decode
labels only when they are close to the center of the aiming
pattern, which is the area indicated by the red cross. Pick
Mode is a Decoding and Transmission process where bar
codes that are not within the configurable distance from
the center of the aiming pattern are not acknowledged or
transmitted to the host. It is active only while the scanner
is in Trigger Single mode. If the scanner switches to a dif
-
ferent Read Mode, Pick Mode is automatically disabled.
★ = default value
MULTIPLE LABEL READING
The reader offers a number of options for multiple label
reading. See the PRG or software configuration tool for
descriptions of these features and programming labels.
NOTE: This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for more
information.
PICK MODE
ENTER/EXIT PROGRAMMING MODE
★ Pick Mode = Disable
Pick Mode = Enable
To Next Page
Loading...
Need help?
General
