Datalogic QuickScan QW2500

Technical Specifications
QUICK REFERENCE GUIDE 27
TECHNICAL SPECIFICATIONS
The following table contains Physical and Performance
Characteristics, User Environment and Regulatory infor-
mation.
PHYSICAL CHARACTERISTICS
Color
Black
White
a
a. Only for QuickScan™ QD2500
Dimensions
Height 14.8 cm (5.8”)
Length 12.6 cm (4.96”)
Width 6.8 cm (2.7”)
Weight approx. 145gr. (5.1oz.)
ELECTRICAL CHARACTERISTICS
Power Supply
(WLC4190)
5 VDC ± 5%
Consumption
(Typical)
Operating (Typical): <400 mA @ 5V
Standby/Idle (Typical): <90 mA @ 5V
Battery Capacity Li-Ion 3.6V, 3250 mAh (11.7W/h)
Max. Scan Rate 60 frames/sec
Reading Indicators Top illumination, Good Read Spot, Beep
ENVIRONMENTAL CHARACTERISTICS
Operating Tempera-
ture
0 °C to + 50 °C (+32° F to +122 °F)
Storage Temperature -40 °C to + 70 °C (-40 ° F to +158 °F)
Humidity 95% non condensing
Drop Resistance
IEC 68-2-32 Tested
1.5 m (4.9 ft)
Trigger Resistance 10 Mbits
ESD Protection 16 KV
Protection Class IP52
Cable Length Refer to www.datalogic.com
OPTICAL CHARACTERISTICS
Optical Format
QuickScan™ QD2500: 1/4"
QuickScan™ QW2500: 1/6"
Active Imager Size
QuickScan™ QD2500: 3896 um (H) x 2453 um (V)
QuickScan™ QW2500: 2396 um (H) x 1797 um (V)
Active Pixels
QuickScan™ QD2500:1280 H x 800 V
QuickScan™ QW2500: 640 H x 480 V
Illumination System
LED source
Red Emission (wavelength - 624 nm)