Need help?Do you have a question about the Datalogic SG4 Extended Series and is the answer not in the manual?
General| Series | SG4 Extended Series |
|---|---|
| Type | Safety Light Curtain |
| Supply Voltage | 24 V DC ± 20% |
| Housing Material | Aluminum |
| Operating Temperature | -10 °C to +55 °C |
| Detection Capability | Opaque objects |
| Safety Level | SIL3 / SILCL3 / PL e / Category 4 |
| Response Time | ≤ 20ms |
| Output | 2 PNP safety outputs |
| Protection Degree | IP65 |
| Functions | Muting |
| Connection | M12 connectors |
| Resolution | 14mm, 20mm, 30mm, 40mm |
Describes the manual's purpose and explains symbols used for key issues or procedures.
Details how to get technical help via website and authorized resellers for assistance.
Explains CE marking, its implications, and requirements for product compliance.
Details the light curtain's function as an optoelectronic device and lists package contents.
Describes available models (SG4-P, SG4-N) and highlights new features compared to previous series.
Explains detection capability (resolution) and the height of the detection zone.
Details factors and formula for calculating the required safety distance.
Shows common use cases for the light curtains, such as on drilling and bending machines.
Precautions for device choice, installation, and correct placement for safety.
Spacing from surfaces, other devices, and correct emitter/receiver orientation.
Essential checks to perform after initial installation and before machine startup.
Connector pin assignments for Muting/Blanking, and important connection considerations.
Covers Basic (BCM) and Advanced (ACM) configuration, password protection, and factory reset.
Lists available functions and their settings for SG4-P and SG4-N models.
Details on restart modes, test function, reset procedures, and external device monitoring.
Adjusting operating distance, muting functionality, and override procedures.
Allows specific objects to pass through the detection zone with various configurations.
Connecting multiple units in cascade and using coding to prevent interference.
Explains LED status for operation, alignment, and troubleshooting.
Details error codes, their meanings, and recommended troubleshooting steps.
Procedures for cleaning, maintenance, and proper product disposal.
Covers safety category, electrical, optical, and mechanical/environmental data.
Lists available models with their controlled height, beams, response times, and resolution.
Provides diagrams and measurements for the physical dimensions of the units.
Details on included accessories and a list of optional items like brackets and cables.
To Next Page