RAPID CONFIGURATION
9 SMART-VS
Import Job
To import one or more jobs from another device.
New Job
To create a new job through the Teaching wizard. Refer to "Teaching" on page 9.
Settings Restore
When a Settings Backup of a device has been completed (refer to "Utilities" on page 15),
this button allows importing all jobs and global settings of that device. Clicking on the
Settings Restore button opens the following window:
After selecting the backup file (.svsbck format), select one or more job you want to
restore and confirm. The global settings will be restored automatically. At the end of the
procedure, the
Monitoring page is displayed.
Upload Package
To upload a firmware package.
Download Package
To download the device firmware package.
Teaching
To perform Teaching on the Smart-VS device, enter a job name, select the bank where
to store it, click on the Create Job button, and follow the procedure described below.
CAUTION: Do NOT perform the Settings Restore and Upload Package opera-
tions while the device is receiving trigger signals.
To Next Page
Loading...
