ISO MAX V Manual – v. 1.2 – july 2012 20
8 Software to remote control the reader
8.1 Introduction
WinMax is a simple software that can be used to check the communication functionality of
Datamars’ ISO MAX readers.
WinMax is also useful for downloading the data stored in the reader memory on to your PC.
This data can be modified or partially saved. WinMax can be used also to erase the ISO MAX
memory.
It is also possible to use WinMax to transmit the code to your computer as you see it on the
reader.
8.2 How to install WinMax
1. Insert the ISO MAX CD in the PC.
2. The CD will start automatically.
3. Click on the WinMax link corresponding to your PC’s operating system.
4. Then follow the installation instructions.
How to run it: Start WinMax, select the serial port to be used with the ISO MAX.
8.3 How to use WinMax
Files in use:
Once saved, you will find in the document WINMAX.TXT all the data downloaded from the ISO
MAX.
WINMAX.TXT is a text file (ASCII) and can be read by any text editor.
Below is the WinMax utility. The version indication may differ. Some changes may be included
in the software and do not require a new manual.
To Next Page
Loading...