Datamars ISO MAX V - Page 24

ISO MAX V Manual – v. 1.2 – july 2012 24
10.1.1 Get firmware version command
• Command syntax: “.v” [CR]
• Command answer: [CR][LF] ”ISO MAX V v1.0” [CR][LF]
• Command action: none
• Parameter range: none
Description: this command returns the firmware version.
10.1.2 Read command remotely
• Command syntax: “.r” [CR]
• Command answer: [CR][LF] "981098100607135" [CR][LF]
• Command action: starts a reading session
• Parameter range: none
Description: this command starts a reading session and answer the ID code.
If no TAG are found the command answer [LF][BEL].
10.1.3 Sets the date’s year
• Command syntax: “.YE##” [CR]
• Command answer: [LF]
• Command action: Sets the date’s year
• Parameter range: ##= 00 to 99
Description: this command sets the date’s year.
10.1.4 Sets the date’s month
• Command syntax: “.MO##” [CR]
• Command answer: [LF]
• Command action: Sets the date’s month
• Parameter range: ##= 01 to 12
Description: this command sets the date’s month.
10.1.5 Sets the date’s day of the month
• Command syntax: “.DA##” [CR]
• Command answer: [LF]
• Command action: Sets the date’s day of the month
• Parameter range: ##= 01 to 31
Description: this command sets the date’s day of the month.
10.1.6 Sets the date’s day of the week
• Command syntax: “.WD#” [CR]
• Command answer: [LF]
• Command action: Sets the date’s day of the week
• Parameter range: #= 0 to 6. Where 0=Sunday, 1=Monday, …
Description: this command sets the date’s day of the week.
10.1.7 Sets the current date format
• Command syntax: “.DF#” [CR]
• Command answer: [LF]
• Command action: Sets the date format
• Parameter range: #= 0 or 1. where 0=Europe, 1=USA
Description: this command sets the date format.