Allegro2 31
♦ Creating Labels Using Internal Batch
Software
3.0 Introduction
The Printer can be used in any one of three different operating
modes: RS-232 to a host computer; a PC with a compatible software
package, or; LINK MC2 CRT with Internal Batch Software, a stand-
alone label creation package developed especially for the Printer.
This section focuses on the Printer's internal labeling software
program.
The program uses two screens, one to create or modify a label and
the other to print a label. A system maintenance screen is included
for printing test labels, copying and formatting memory modules,
and performing several other functions.
Internal Batch Modules can store up to 200 label formats per Flash
Module and each can hold up to 128K of memory shared between
label formats and graphic images. You can purchase as many
Internal Batch Modules as you need for your applications.
To Next Page
Need help?
General
