Creating Labels Using Internal Batch Software
Allegro2 43
4. The Printer can print fonts, barcodes, and graphics at 0, 90,
180, or 270 degree rotations. Valid responses to the ROT
prompt include:
1 = 0 degrees
2 = 90 degrees
3 = 180 degrees
4 = 270 degrees
5. In the FNT position, enter the type of font you want to
print. This can be an alphanumeric font or a barcode. Enter
one of the following:
• An alphanumeric font type, followed by the return key.
Choices are 0 through 8. See Appendix C for examples
of each available font type and for the actual printed size
of the various fonts using different multiplication
factors.
• An alphanumeric CG Triumvirate font type, followed
by the return key; the only choice is 9. See Appendix C
for examples of each available font type and for the
actual printed size of the font using different
multiplication factors. The point size is selected in the
barcode height field. Values are 001 through 010.
• A barcode, followed by the return key. Choices are
uppercase A through R, except for P (Postnet). For
barcodes that include the human-readable interpretation
line, or lowercase a through r for barcodes without
human-readable lines, see Appendix C for examples of
each available barcode.
• X is a special font choice that is not actually a font. The
X font selects box and line drawing. Later, in the
Data/Prompt Position, the format for lines or boxes
must be entered .
To Next Page
Loading...
Need help?
General
