ii
♦ Troubleshooting
4.0 Introduction .....................................................59
4.1 Controlling print quality ...................................60
4.2 Aligning the Printhead ......................................61
4.2.1 Printhead Alignment Procedure .........63
4.2.2 Adjusting Printhead Pressure/Support 65
4.3 Troubleshooting.................................................66
♦ Maintenance
5.0 Introduction .....................................................69
5.1 Cleaning Schedule............................................70
5.2 Cleaning the Printhead......................................70
♦ Appendix A
ASCII Control Code Chart.................................A-1
♦ Appendix B
Switch Settings and Cable Interfacing................B-1
♦ Appendix C
Available Fonts and Barcodes............................C-1
♦ Appendix D
Error Codes .......................................................D-1
♦ Appendix E
Cable Listings ....................................................E-1
♦ Appendix F
Specifications.....................................................F-1
♦ Appendix G
Warranty Information ........................................G-1
To Next Page
Loading...
