7. Maintenance
Cleaning the Print Head and Roller
Only use cleaning cloths from
Imaje. These are specially
designed for cleaning Imaje
thermal printers. See chapter
10.2 for correct type.
Note:
Frequent cleaning prevents
print head and roller damage,
and is especially important in
demanding environments.
• Do not use liquids or
aerosols when cleaning this
printer.
• Never use sharp or pointed
tools when cleaning or
replacing the print head.
Remove all media before
starting:
1.
2.
3.
4.
Tear the bag.
Pull out the cleaning cloth.
Pull the handle and feed
the cloth into the printer in
the same way as inserting
the media (described in
chapter 5.3). Fold the
handle. Hold the cloth
firmly and press the print
button a few seconds. Hold
on tight when the printer
tries to force the cloth into
the printer. (The cloth
cleans the roller as it turns.)
Release the cloth and let it
pass through the printer.
(This cleans the print
head.)
To Next Page
Loading...
