dataTaker DT80 - Network (TCP;IP) Services

UM-0085-B09 DT80 Range User Manual Page 383
RG
Integrated Modem (DT8xM only)
• Cellular Networks:
DT8xM3 models: GSM (2G), GPRS/EDGE (2.5G), WCDMA (3G), DSDPA/HSUPA (3.5G)
DT8xM2 models: GSM (2G), GPRS/EDGE (2.5G)
• Frequencies:
DT8xM3 models: quad-band 2G (850/ 900/ 1800/ 1900MHz), tri-band 3G (850/ 1900/ 2100MHz)
DT8xM2 models: quad-band 2G (850/ 900/ 1800/ 1900MHz)
• Subscriber Identity Module: Standard format SIM slot (1.8V/ 3V)
• Antenna connection: two standard SMA screw connections: main (Tx/ Rx) and diversity (Rx only)
• Included antenna: 1 x Micromag multiband antenna with 2m cable
• Status LED: Power/ connection status
• Firmware: Upgradeable via USB memory device
• Protocols: TCP/IP (PPP), SMS
Integrated Modem (DT8xW only)
• Antenna connection: one standard SMA screw connections
• Included antenna: 1 x Micromag multiband antenna with 2m cable
• Status LED: Power/ connection status
Network (TCP/IP) Services
Uses Ethernet and/or Host/USB/serial sensor (PPP) ports, or integrated modem
Command Interface Server
• Allows access to the ASCII command interface via TCP/IP
Web Server
• Configure the DT80 and access current data and status from a web browser.
• Supported browsers: Internet Explorer Version 7 or later, Mozilla Firefox, Google Chrome, Apple Safari
• Custom pages can be defined
• Download data in CSV format
• Command interface window
• Define mimic displays.
Modbus Server
• Access current data and status from any Modbus client (e.g. SCADA system)
Modbus Client (not DT81/82)
• Poll serial or network Modbus sensors
FTP Server
• Access logged data from any FTP client or web browser
FTP Client
• Automatically upload logged data direct to an FTP server
Email Client
• Automatically send logged data to an email address
• Send alarm messages to an email address
DDNS Client (DT8xM only)
• Updates a Dynamic Domain Name Service server so DT80 can be accessed over the Internet using a domain
name.
NTP Client
• Automatically synchronise system time to NTP server