Datavideo PTC-200W - DIP Switch SW2 (IRID)

11
4.2 DIP Switch SW2 (IRID)
The IRID DIP Switch can be found on the rear panel of the PTC-200/PTC-200W
camera. This DIP switch allows the user to assign an ID number to the camera
so that the user can navigate between the cameras by pressing the CAMERA
SELECT buttons.
DIP SW 1/2
Camera Select Function (IR Remote
Control) – Camera ID Assignment
OFF/OFF
CAM1
ON/OFF
CAM2
OFF/ON
CAM3
ON/ON
CAM4
* DIP SW 3/4 should be always OFF.