7
1. Product Overview
The PTC-200/PTC-200W Video Camera is a 4K UHD PTZ camera that can be
mounted on a wall, ceiling, floor, or a tabletop. The camera captures up to 4K
(3,840 x 2,160, UHD) video at 2160p29.97/25 resolution, and features a wide
dynamic range with backlight compensation. The camera features a motorized
12x optical zoom capability, and its image mirror and image rotation functions
allow you to electronically adjust the image and deliver a correctly oriented
image.
50 programmable presets including pan, tilt, and zoom positions, allow the
camera to quickly move between predetermined camera positions using the
remote, or an available PTZ controller.
For multi-camera shoots, the built-in tally light can identify active camera. The
camera features a built-in IR cut filter in the image path for low light shooting,
and then returns for daytime shooting. Moreover, PTC-200/PTC-200W
supports real time position report on a per frame basis; this will be helpful to
virtual studio application. The camera supports Sony VISCA protocol for PTZ
control using RS-422 interface over the unit's RJ-45 port.
2. Features
• HD Resolution: 1/2.3" High Definition 8.93 M Pixels progressive CMOS
sensor
• 12x optical zoom (f = 3.9 mm to 46.8 mm)
• High definition formats supported:
- 4K (3,840 x 2,160, UHD): 2160p/29.97, 2160p/25
- HD: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 720/59.94p,
720/50p
• Digital Noise Reduction Function (DNR) to reduce the noise and enable
clearer image under low light conditions.
• Position coordinates report in real time per frame
• Video Output: 3G-SDI + HDMI synchronously
• Tally LED Design (IR Controller / RS-422 / DVIP Operation)
• Supports VISCA Protocol Keyboard
• Supports DVIP Control Protocol
To Next Page
Loading...
