2 DEFINITIONS
2.1 Warnings
The following signs warns the operator for a possible danger.
Figure 2-1 Figure 2-2
Figure 2.1 is a sticker which is used on the machine indicating the position where caution must be
taken to avoid stucking into the machine.
Figure 2.2 is a sticker which is used on the machine indicating where electrical power is present.
Before taking in use the machine, you should carefully read this manual and follow the instructions.
Make sure that the warning stickers stay in good condition and, if necessary, replace them.
When you use the machine for the first time, follow the instructions in this manual carefully so that
you will not be surprised.
Do not allow unqualified employees to operate the machine.
Only qualified employees may operate the machine.
Make sure the machine is switched off during cleaning, maintenance and lubrication.
After maintenance of the machine, do not forget to replace the safety guards and close the door at
the backside.
All repairs, mechanical as well as electrical, may only be done by qualified employees.
2.2 Qualified employees
We herewith mean: persons who are familiar with the installation, mounting, taking in use and
working of the machine and who have the right qualifications.