3 SAFETY
3.1 Safety regulations
Remove plug from the power supply when cleaning and/or maintaining the machine.
Only qualified or well instructed employees can do repairs of mechanical or electrical
nature.
Never put your hands in its working area when using the
machine (see figure 3-1).
Only one person may use the machine.
Keep guards placed when operating the machine.
3.2 Dangers because of mechanical components
Safety guards protect all parts. Because of the manual operating order, the operator can
stops his actions at all time.
When maintaining the machine and especially when removing parts without
respecting standard safety regulations, you might get injured when not
carefull.
Do not keep your hands at the back of the dividing disc. You might
get stuck when rotating the dividing disc back (see figure 3-2)
when you are ready cleaning.
By proper use of the machine as described in chapter 7 no dangers will occur.
3.3 Dangers because of electrical components
These dangers will not occur because the electrical parts are not direct accessible.
Broken or damaged cables and electrical componements should be replaced immediately by an
electricien.
3.4 Dangers because of lack of hygiene
These dangers can occur if the measures such as described in chapter 9 (“Maintenance”) are not
followed up.
To Next Page
Loading...
