122
When you are finished, you can logout from the Cortex with the Icon at the top
left.
Special note for DavLink: Contrary to operation through a web browser, in DavLink,
workspaces can only be used locally. This means that DavLink does not download
the workspace from the Cortex unit when it connects, but instead loads it internally
from the computer’s memory. DavLink has been configured this way to allow
operation over narrow-band data channels like slow satellite links, narrowband radio
channels or RS-232 multi-drop lines.
Troubleshooting: Once you have connected to DavLink, if the Cortex GUI displays in
a small window in the corner and then disappears after a few seconds, try closing all
the open DavLink windows you have. One might have stopped responding if you
made multiple updates.
Setting Internal Jumpers and DIP Switches
For more information on how to set the internal jumpers and DIP switches, please
refer to this article.
To Next Page
Loading...
