22
To clear daily, monthly or yearly HIGH/LOW data:
1. Press HI/LOW.
2. Select the variable you wish to clear.
3. Press 2ND then CLEAR, holding CLEAR down until the digits stop
flashing and zeroes or dashes appear in the field.
To clear a single alarm setting:
1. Press 2ND then ALARM.
2. Select the alarm reading you wish to clear.
3. Press 2ND then CLEAR, holding CLEAR down until the digits stop
flashing and dashes appear in the fields.
4. Press DONE to return to the current weather screen.
To Clear All:
1. To clear all highs and lows and all alarms, press WIND until wind speed
appears, then 2ND, then CLEAR, holding CLEAR down for the entire 6-
second countdown until you see CLEARING NOW in the Weather Center.
Clear
To Next Page
Loading...
Need help?
General
