dB Technologies VIO L212 - 1. GENERAL INFORMATION; Welcome and Product Introduction; Product Overview and Key Features

1100
380
330
4500
30
32
155
59
48,5
31
VIO-L212 Code 420120270 REV. 1.0
1. GENERAL INFORMATION
WELCOME!
PRODUCT OVERVIEW
Thanks for purchasing a product designed and developed in Italy by dBTechnologies! This
powerful active line-array, suitable for the most demanding live performances, is the result of years of experience
in the eld of sound reinforcement. It makes use of innovative optimized sound, electronic and material research
solutions.
The VIO-L212 3-way active line-array module marks
a new era in the research and optimization eld for
large-sized indoor and outdoor professional live
applications. The key features are:
• optimization between full-range acoustic
performance and sizes
• a 3-point integrated rigging system for an
efcient assembly/disassembly
• professional accessory line specic for handling
and assembly
• amplication section comprising 2 DIGIPRO G4
1600 W RMS each, controlled by DSP at 32 bits
(special FIR ltering)
• ADC Floating technology, developed for a perfect
isolation from interference, noise or hums, of the
audio input
• DSP control and real-time ltering with FIR lters
• power, audio and mains daisy chains for
optimized wiring
• on-board RDNet control, pre-set for AoIP
Audinate DanteTM protocol
• predictive and remote management software
(DBTECHNOLOGIES COMPOSER, EASE, EASE
FOCUS 3, AURORA NET)
English