dB Technologies VIO L212 - 9. SPECIFICATIONS; General Specifications; Acoustical Specifications; Amplifier Specifications

53
VIO-L212 Code 420120270 REV. 1.0
9. SPECIFICATIONS
Type: Active 3-way line-array module
GENERAL
ACOUSTICAL SPECIFICATIONS
AMPLIFIER
Frequency response [- 10 dB]: 49.8 - 20000 Hz
Frequency response [- 6 dB]: 55 - 18600 Hz
Max SPL: 142 dB (frequency/preset dependent)
HF: 2 x 1.4” (Coil: 3”)
Type of HF transducer: Titanium
MF: 4 x 6.5” (Coil: 2”)
Type of MF transducer: Neodymium
LF: 2 x 12” (Voice Coil: 3”)
Type of LF transducer: Neodymium
Waveguide for high frequencies: Yes
Horizontal directivity: 90°
Vertical directivity:
variable, depending on the conguration and the number of
modules
Type: (2x) Digipro® G4
Amplication class: Class D
Amplication power (Peak) 2x 1600 W (3200 W)
Amplication power (RMS): 2x 3200 W (6400 W)
Power supply: Fullrange with PFC, range 100-240V~ (50-60Hz)
Cooling technique: Convection + fans with lower ventilation grilles
Operating temperature range (ambient): from -15° to + 55° [°C]
English