- 16 -
3 FIT AP Mode
When there are a large number of APs on the network, the configuration or
management one by one will become more complicated. At this time, it is suitable
to use the FIT AP mode + AC (AP controller) for unified management and
configuration, thereby reducing the configuration and management costs.
The typical topology is as following:
The AP is shipped in FIT AP mode by default. You can also switch to FIT AP
mode by restoring the factory setting or following the instructions in the AP mode
chapter. The wireless configuration of the FIT mode is operated uniformly through
AP
POE Switch
Internet
Gateway
AC
AP
AP
To Next Page
Loading...
