EasyManua.ls Logo

DCS F-5E Flaming Cliffs - Takeoff

DCS F-5E Flaming Cliffs
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DCS
[FLAMING CLIFFS]
16
PROCEDURES
Warning. If the trim is not set to the takeoff position, a considerable dive moment will be generated after
liftoff, which may cause the aircraft to crash, especially with a high takeoff weight.
Table 2. Pitch Trim takeoff position
Approximate takeoff
configuration
Indicated pitch trim
position
Without gun ammo,
without stores
6
External fuel tanks,
ammo, missiles
7
External fuel tanks,
ammo, missiles, bombs,
rockets
8
Ammo, missiles, bombs,
rockets, containers
9
Takeoff
Perform the following steps for takeoff:
1. Apply main wheel brakes W .
2. Advance throttles to MIL Numpad+ (101 ± 2%). After that, advance throttles to MAX
Numpad+ . The afterburner switches on within approximately 5 sec.
3. Release the brakes, start takeoff run.
4. Maintain direction along the runway centerline by using the pedals Z and X .
5. Approximately 10 KIAS before liftoff speed, gently pull back on the stick to lift the nose wheel
and transition to a takeoff attitude. After liftoff, gently push the stick forward to avoid high
angles of attack and stall.
Table 3 shows correlation between liftoff speed and takeoff weight.

Related product manuals