KD2 Pro 3 THE MENUS
• 8 data bits, 1 stop bit, no parity
• No software or hardware flow control
• Append line feeds to incoming line ends
• Echo typed characters locally.
2. Connect your KD2 Pro to an available USB port on your com-
puter using the included USB-to-Serial cable.
3. Set your terminal software to capture received data if you want
to save the data.
Erase
This erases all stored data on your KD2 Pro.
Caution: This feature completely erases all data on your
KD2 Pro, and once activated, it cannot be undone.
Follow steps 1 through 3 to erase data.
1. Press Enter to select Erase. The screen “Erase all stored data?”
appears.
2. Press Enter again to erase the memory or Escape if you decide
not to continue. “Erasing...” displays as the device deletes,
which usually takes about six seconds.
3. When this is complete, the controller returns to the Data Menu.
3.3 The Configuration Menu
The Configuration Menu allows you to change system settings and
view information about your KD2 Pro. A battery icon here also
displays the remaining percentage of battery power. There are seven
main customizable features of the “Config” menu: Date, Time, Units,
Read Time, Power Mode, Contrast and the About feature.
21
To Next Page
Loading...
