WP
4
PotentiaMeter
Menus
16
Changing Languages
The WP-4 comes to you with English as the default
on-screen user language. If you prefer not to use
English, you can change it to one of a variety of
other languages: German, French, Spanish, Italian,
Swedish, Danish, Norwegian, Czech, Portuguese, or
Japanese. This is done simply by pressing the upper
right button of the instrument while it is not reading
a sample. You will see the following screen:
Press the upper right key again, and the next lan-
guage option (German) will appear:
Each time you press the right button, the display
will scroll to the next language option. Select the
desired language, then press the lower left button to
exit.
Normal sampling mode
The first time you turn on the WP4, it will be in nor-
mal sampling mode. In this mode, a single measure-
ment is made each time you read a sample. Here is
English
-exit-
Deutsch
-zurück-
To Next Page
Loading...