WP
4
PotentiaMeter
Menus
17
a brief summary of the normal sampling mode fea-
tures:
• single sampling (not continuous).
• instrument may or may not beep after mea-
surement is made, depending on the system
setting.
• green LED blinks until you turn the drawer
knob to the OPEN/LOAD position.
diagram of button options from main menu
Continuous mode
Continuous mode measures the water potential of
your sample continuously until you turn the drawer
knob to the OPEN/LOAD position. This can be use-
ful in doing long term monitoring of samples that
take an especially long time to come to vapor equi-
librium, such as plants and leaves. In this mode, it
sample temperature menu
system setup
continuous/normal mode
0.0°C
0.00 MPa
pF 0.00
To Next Page
Loading...