SI-3
™
User’s Manual
23
9.2 FCC Statement
This device complies with FCC part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
9.3 Conditions
Changes or modications not expressively approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
9.4 Installer Note
This device must be installed in a manner that ensures 20 cm
separation is maintained between this device's antenna and
all persons in order to comply with the FCC and IC RF exposure
requirements.
9.5 End User Note
Maintain a 20 cm separation between this device's antenna and all
persons during operation in order to comply with the FCC and IC RF
exposure requirements.
10. Frequently Asked Questions (FAQ)
Q. My SI-3™ has poor range. How can I remedy this?
A. Verify that the antenna has no obstructions in front of it. If the
gun still has poor range, increase the sensitivity level. If you still
have this problem, contact Decatur Electronics.
Q. What if I drop my SI-3™?
A. The unit is extremely durable. Simply power up and perform
tuning fork test. If the unit doesn’t appear to work properly,
contact Decatur Electronics.
To Next Page
Loading...
