SAFETY INSTRUCTIONS
Warning
Do not use means to accelerate the defrosng process or to clean, other than those recommended by the manufacturer.
The appliance shall be stored in a room without connuously operang ignin sources (for example: open mes, an
operang gas appliance or an operang electric heater.)
Do not pierce or burn.
Be aware that refrigerants may not contain an odour.
Appliance shall be installed, operated and stored in a room with aor are
a larger than 12.5 m
2
.
Keep any required venaon openings clear of obstruon.
Servicing shall be performed only as recommended by the manufacturer.
The appliance shall be stored in a well-venated area where the room size corresponds to the room area as specied
for operaon.
Any person who is involved with working on or breaking into a refrigerant circuit should hold a current valid cercate
from an industry-accredited assessment
authority, which authorises their competence to handle refrigerants safely in
accordance with an industry recognised assessment specicaon.
Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance and repair requiring
the assistance of other skilled personnel shall be carried out under the supervision of the person competent in the use of
mmable refrigerants.
All working procedure that aects safety means
shall only be carried by competent persons.
Be careful not to bump when moving to avoid leakage in the refrigeraon line.
Flammable material.
This appliance contains
R290/Propane, a ammable
refrigerant.
Refer operators
manual
Read technical
manual
Read operators
manual
Notes:
The air condoning is only suitable for indoor use, and is not suitable for other applicaons.
Follow local grid interconnecn rules while installing the air condoning and e
nsure that it is properly grounded. If
you have any queson on electrical installaon, follow the instruons of the manufacturer, and if necessary, ask a
professional electrician to install it.
Place the machine in a at and dry place and keep a distance of above 50cm between the machine and the surrounding
objects or walls.
Aer the air condoning is installed, ensure that the power plug is intact and mly plugged into the power outlet, and
place the power
cord orderly to prevent someone from being tripped or pulling out the plug.
Do not put any object into the air inlet and outlet of the air condoning. Keep the air inlet and outlet free from
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22
23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65