Dedicated Micros Digital Sprite 2 - Page 111

Dedicated Micros Page 109
# disk_offset : The offset into the disk for the WebPages, Application, Form Files etc; start making video partitions
# specified in 64 KiloBytes blocks default=3200 (Equal to 200 MegaBytes)
# write_type : unbuffered - writes data straight to the hard disk drive. Useful to speed up height images sizes
# written at fast to the HDD.
# NOTE:- This can be wasteful when writing images to HDD i.e. 256 bytes per image on average. buffered -
# Default setting - Buffers data to a fixed 20 KiloByte
# buffer prior to a HDD write. More efficient when writing
# images to the HDD.
# ———————————-
# Drive Definitions A – Z
# ———————————-
# Drive a = 4096 KB Ram
# Drive b = 16 KB RAM
# Drive c = MASTER 3.5”
# Drive d = SLAVE 3.5”
# Drive e = Master 3.5”
# Drive f = Slave 3.5”
# Drive g = Flash Drive
# Drive h to K not used
# Drive l to Z = SCSI Drive ID-0 to 7 LUN-0 to LUN-7
# DS2 will support up to Drive letter Z
# Note:- If multiple logical unit numbers (LUN) are used within the SCSI ID, the DS2 will automatically offset the
logical drives between drive letters L to Z.
# e.g. SCSI ID-0 LUN-o = Drive L
# SCSI ID-0 LUN-1 = DRive M
# SCSI ID-0 LUN-2 = DRive N
# SCSI ID-1 LUN-0 = DRive O
# SCSI ID-1 LUN-1 = DRive P
# SCSI ID-2 LUN-0 = DRive Q
# ———————————-
# Drive Partition Options
# ———————————-
# 10 MegaByte Partition - 10485760 - For hard disk sizes 160 GB or less
# 50 MegaByte Partition - 52428800 - Default in Bootloader & upto 600 GB
# 100 MegaByte Partition - 104857600 - For hard disk blocks larger that 600 GB
# 200 MegaByte Partition - 209715200 - For hard disk blocks larger than 2000 GB
# ———————————————————————————————————————————————-
# Use the following settings to format Addresses 0 to 6 for drives l: to r: external SCSI drives.
# ———————————————————————————————————————————————-
# [Partition 5]
# path=l:\video
# max_blocks=-1
# file_size=104857600
# disk_offset=3200
# [Partition 6]
# path=m:\video
# max_blocks=-1
# file_size=104857600